Introduction

This guide details the process for configuring the Direct Certificate Discovery Tool (DCDT, or the Tool) following the completion of one of the Install Guide(s).

Document Conventions

Variables

Replace all instances of the following prior to running commands:

 

KeyValue Description
<yourhealthdomain.com>Your deployment domain.
<yourhealthdomain.com ip>Your deployment domain IPv4 address.
<result mail address>Result mail address.
<result mail pass>Result mail password.
<result mail host>Result mail host.

 

Requirements

You have completed the Linux Package Install Guide and optionally the Source Build Guide.

Generate & Deploy Tool Data

Generate the Tool data by running the Data Generator utility:

sudo /usr/share/direct/direct-cert-discovery-tool-utils/bin/datagen.sh -d <yourhealthdomain.com>

Deploy the Tool data by running:

sudo unzip -o /usr/share/direct/direct-cert-discovery-tool-utils/out/datagen/<yourhealthdomain.com>-data.zip -d /var/lib/direct/direct-cert-discovery-tool
sudo chown -R tomcat7:tomcat7 /var/lib/direct/direct-cert-discovery-tool

Generate & Deploy Tool Configuration

Generate the Tool configuration by running the Configuration Generator utility:

sudo /usr/share/direct/direct-cert-discovery-tool-utils/bin/configgen.sh -d <yourhealthdomain.com> --ra <result mail address> --rps <result mail pass> --rh <result mail host>

Deploy the Tool configuration by running:

sudo unzip -o /usr/share/direct/direct-cert-discovery-tool-utils/out/configgen/<yourhealthdomain.com>-config.zip -d /var/lib/direct/direct-cert-discovery-tool
sudo chown -R tomcat7:tomcat7 /var/lib/direct/direct-cert-discovery-tool

Load Tool Data

Load the Tool data by running the Data Loader utility:

sudo /usr/share/direct/direct-cert-discovery-tool-utils/bin/dataloader.sh -d <yourhealthdomain.com> --dip <yourhealthdomain.com ip>

Load Tool LDAP Data

Load the Tool LDAP data by running the LDAP Loader utility:

sudo /usr/share/direct/direct-cert-discovery-tool-utils/bin/ldaploader.sh -d <yourhealthdomain.com>

Reload the Tool

Restart the Tomcat 7 service by running:

sudo service tomcat7 restart

Configure James

Stop the James 3 service by running:

sudo service james3 stop

Set the Tool James domains by running:

sudo /usr/share/direct/direct-cert-discovery-tool-utils/bin/james3-setdomain.sh <yourhealthdomain.com>

Start the James 3 service by running:

sudo service james3 start

Add the Tool James users by running:

sudo /usr/share/direct/direct-cert-discovery-tool-utils/bin/james3-addusers.sh <yourhealthdomain.com>
  • No labels